VII Deadly Sins Instruction Manual This pedal is: May be covered by one or more of the following: U.S. Patents #4538297, 4647876, 4696044, 4745309, 4881047, 4893099, 5124657, 5263091, 5268527, 5319713, 5333201, 5402498 and 5493617. Other patents pending. Foreign patents pending.
Compliance Your VII Deadly Sins™ pedal has been tested and complies with the following Standards and Directives as set forth by the European Union: Council Directive(s): Compatibility 89/336/EEC Standard(s): EN55013, EN50082-1 Electromagnetic This means that this product has been designed to meet stringent guidelines on how much RF energy it can emit, and that it should be immune from other sources of interference when properly used.
Precautions Refer all service to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or if the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT. QUALIFIED PERSONNEL SHOULD SERVICE THIS EQUIPMENT ONLY.
Introduction If you have never experienced the wonders of an Auto Wah pedal, jump on board now with Rocktron’s VII Deadly Sins! Seven deadly sins will be washed away with this intriguing effect that will offer up bliss filled wah sounds with incredibly easy control. Part of the Rocktron Boutique Series of stomp boxes this pedal design comes in a rugged metal chassis with eye popping retro custom design laser etched artwork.
Introduction a minimum of real estate on your pedalboard, yet provides years of solid performance in a rugged chassis. The VII Deadly Sins is sure to inspire your next composition and your stage performances. Wah effects are at the heart of so many great songs and solos, and Rocktron’s stomp box will be no exception. The footswitch on the VII Deadly Sins Auto Wah controls On/Off status (indicated by the LED). This stomp box runs on a 9V Alkaline battery.
Descriptions 1 2 3 4 5 8 6 7
Descriptions continued......... 1 MODE Control - This control allows you to select DOWN, MIDDLE or UP of the response curve applied to the wah filter. 2 Q-SHAPE Control -The control determines the width of the wah filter boost. 3 9VDC Input - This input jack provides 9VDC power to the pedal from the Rocktron DC OnTap 9V power supply (sold seperately). 4 DEADLY SIN Control - This control determines the threshold point at which the wah will activate.
Descriptions continued......... 7 INPUT Jack - Using a standard 1/4” guitar cable, plug your guitar into this jack. 8 OUTPUT Jack - Using a standard 1/4” guitar cable you can plug in another pedal from this jack or plug directly into your amplifier.
Typical Connection
Specifications Maximum Input Maximum Output Imput Impedance Output Impedance Current Consumption Power Requirements Dimensions Weight 3dBu 8dBu 1MΩ 10k 15mA 9V Alkaline Battery or Rocktron DC OnTap Univeral Power Supply (sold seperately). Negative tip. 95mm x 122mm x 56mm 3.75” x 4.75” x 2.25” 410g 14.
How to change the battery: To change the battery, turn the pedal over and remove the 4 screws on the bottom. Remove the back cover. Carefully remove the old battery and replace it with a new 9V Alkaline battery. Replace battery in the same area as the old battery was located. Place the back cover on the pedal and reinsert the screws. Save yourself tons of money in batteries by using the Rocktron DC OnTap Universal Power Supply to power this pedal (sold seperately).
Rocktron - A Division of GHS Corporation 2813 Wilber Ave Battle Creek MI 49037 USA www.rocktron.com info@rocktron.com tel: 1-269-968-3351 rev. 7-27-09 2009.