User Guide

23
RIGHT
SPEAKER
2 – 4 OHM
RIGHT REAR
SPEAKER
4 OHM
RIGHT FRONT
SPEAKER
4 OHM
LEFT
SPEAKER
2 – 4 OHM
LEFT REAR
SPEAKER
4 OHM
LEFT FRONT
SPEAKER
4 OHM
2 Channel Amp Speaker Wiring
Install any two or four speakers being careful not to load either channel below 2 ohm stereo. For typical 6˝ x 9˝ or 6.5˝ speaker installs, set the Crossover Mode Switch to Full Range. If you
are using a system with a sub we recommend setting the crossover switch to high pass.
CROSSOVER SWITCH SET TO FULL OR HIGH