Owner manual

Flash Updates C-3
Important: In the last screen, the ControlFLASH Setup Complete screen
(Figure C.2
), uncheck both boxes and click Finish.
3. Establish communications between the drive connected to the 1203-USB
converter and the computer. For this procedure, please
see “Using V*S Utilities”
on page 4-4.
4. In the V*S Utilities application window (Figure C.3), click on the device to be flash
updated (for this example, a PowerFlex 70 (Enhanced Control drive).
Figure C.2 – ControlFLASH Setup Complete Screen
Figure C.3 – V*S Utilities Window