User Manual

6–12 Parameters
Publication 1336 FORCE–5.18 ––March, 1999
300
Adapter ID
[Adapter ID]
Adapter ID displays the identifier for the ControlNet
Adapter Board.
Parameter Number 300
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default 1
Minimum Value 1
Maximum Value 1
File – Group Diagnostics – Info
301
Adapter Version
[Adapter Version]
Adapter Version displays the current firmware
version of the ControlNet Adapter Board.
Parameter Number 301
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default 5.xx
Minimum Value 0.00
Maximum Value 9.99
File – Group Diagnostics – Info
302
SCANport Communications Retries
[SP Comm Retries]
SP Comm Retries counts the number of
communication retries for all entries in the SCANport
scan list.
Parameter Number 302
Parameter Type Read, Source
Display Units / Drive Units None
Factory Default 0
Minimum Value 0
Maximum Value 65535
File – Group Diagnostics – Info
303
Channel A DIP Switch
[DIP Switch ChA]
ChA DIP Switch displays the current U3 dip switch
settings in the lower byte. The upper byte (left) is
constant.
Parameter Number 303
Parameter Type Read Only, Source
Display Units / Drive Units Bits
Factory Default 0100 1100 0000 0000
Minimum Value 0100 1100 0000 0000
Maximum Value 0100 1100 1111 1111
File – Group Diagnostics – Info
305
Channel A LED State
[ChA LED State]
ChA LED State displays the current LED state for
channel A. The LED states correspond to LEDs D8,
D10, and D12 on the ControlNet Adapter Board.
Parameter Number 305
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default 0
Minimum Value 0
Maximum Value 5
File – Group Diagnostics – Info
Enums 0 = Off 1 = Red 2 = Green
3 = Yellow 4 = Flash Green 5 = Flash Red