User Manual

6–13Parameters
Publication 1336 FORCE–5.18 ––March, 1999
307
ICN Board Status
[ICN Status]
ICN Status displays the status of the ControlNet
Adapter Board. You can use this parameter to
determine if no fault occurred, or if a warning, soft
fault, or hard fault occurred.
Parameter Number 307
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default 0
Minimum Value 0
Maximum Value 3
File – Group Diagnostics – Info
Enums 0 = No Faults 1 = Drv Warning 2 = Drv Soft Flt 3 = Drv Hard Flt
309
Language Select
[Language Sel]
You can use Language Sel to choose the language
you want the ControlNet Adapter Board to use for
parameter and fault display text. Currently, only
English is available.
Parameter Number 309
Parameter Type Read Only
Display Units / Drive Units None
Factory Default 0
Minimum Value 0
Maximum Value 1
File – Group Startup – Drive Data Group
Diagnostics – Info
Enums 0 = English 1 = Alternate Language (not currently available)
314
Data Input A1
[Data In A1]
Data In A1 contains the first image word from the
SCANport output image table.
Parameter Number 314
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – SCANport I/O
315
Data Input A2
[Data In A2]
Data In A2 contains the second image word from the
SCANport output image table.
Parameter Number 315
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – SCANport I/O
316
Data Input B1
[Data In B1]
Data In B1 contains the third image word from the
SCANport output image table.
Parameter Number 316
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – SCANport I/O
317
Data Input B2
[Data In B2]
Data In B2 contains the fourth image word from the
SCANport output image table.
Parameter Number 317
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – SCANport I/O