User Manual

6–22 Parameters
Publication 1336 FORCE–5.18 ––March, 1999
356
CntlNet Output 5
[CntlNet Out 5]
CntlNet Out 5 contains the sixth word or data group
to the PLC controller input image table. The data is
transferred to the PLC controller every rack scan.
The ControlNet Adapter Board can provide this
value directly. Other drive functions can provide this
value through a configuration link.
Parameter Number 356
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default None
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – Channel A
357
CntlNet Output 6
[CntlNet Out 6]
CntlNet Out 6 contains the seventh word or data
group to the PLC controller input image table. The
data is transferred to the PLC controller every rack
scan. The ControlNet Adapter Board can provide
this value directly. Other drive functions can provide
this value through a configuration link.
Parameter Number 357
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default None
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – Channel A
358
CntlNet Output 7
[CntlNet Out 7]
CntNet Out 7 contains the eighth word or data group
to the PLC controller input image table. The data is
transferred to the PLC controller every rack scan.
The ControlNet Adapter Board can provide this
value directly. Other drive functions can provide this
value through a configuration link.
Parameter Number 358
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default None
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – Channel A