User Manual
Chapter
9
Publication 1336 FORCE–5.18 ––March, 1999
Specifications and
Supplemental Information
Chapter 9 provides specifications and a software block diagram.
The following table shows the specifications for the ControlNet
Adapter Board:
This category:
Has these specifications:
Environmental
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: -40 to 70°C (-40 to 158°F)
Relative humidity: 5 to 95% non-condensing
Shock: 15G peak for 11 ms duration (±1.0 ms)
Vibration: 0.15 mm (0.006 inches) displacement, 1G peak
Electrical Input voltage: supplied by drive
Input frequency: NA
Input current: NA
SCANport load: 60 mA
Vibration: 0.15 mm (0.006 inches) displacement, 1G peak
Communications Drive side: SCANport peripheral interface
PLC side: Allen-Bradley ControlNet
Baud rate: 5 Mbits
Rack size: 8 words In/8 words Out
Analog I/O Differential impedance for input: greater than 1 Ohm
Single-ended impedance for input: 20K Ohm
Maximum voltage for input: ±10V
Output impedance: 100 Ohm
Output voltage: ±10V
Maximum current for output 1mA
Chapter Objectives
Specifications