Manual

10
Chapter
10-1
Serial Port Parameter Settings
Firmware Version 1.013.01
Table 10 -- Parameter List for Parameters 51 to 69
Parameters 51 to 69 can be accessed only through the serial port.
Serial
Port
Parameter Parameter Min/Max Factory
Number Text Units Values Setting
51 CLEAR FAULT Code 0/255 0
52 INPUT FAULT Code 0/99 ---
53
DRIVE F AULT Code 0/99 ---
54
LOCAL INPUT Byte 0/255 ---
55 REMOTE INPUT Byte 0/255 ---
56 SERIAL INPUT Byte 0/255 ---
57
SERIAL MASK Byte 0/255 0
58
DRIVE COMMAND Byte 0/255 ---
59
DRIVE ST ATUS Byte 0/255 ---
60
DRIVE ALARM Byte 0/255 ---
61 DRIVE TYPE Byte 0/255 ---
62
FREQUENCY SOURCE Code 0/13 ---
63
PULSE INPUT Hertz 0.00/250.00 ---
64
SERIAL FREQUENCY Hertz 0.00/250.00 0.00
65
FREQUENCY COMMAND Hertz 0.00/250.00 ---
66 OUTPUT FREQUENCY Hertz 0.00/250.00 ---
67 OUTPUT PULSES
1 Rev/256 0/65535/256 ---
68
SERIAL P ASSWORD Code 0/9999 0
69
REVERSE ST ATUS Code 0/1 0