User guide

1–2 Before You Begin

Publication 1395.5.37 – March, 1999

Safety Precautions The following types of precautionary statements will be found in this

manual.

IMPORTANT: Identifies particular areas of concern for correct board,

processor or Drive operation.

ATTENTION: Identifies information about practices or

circumstances that can lead to personal injury or death,

property damage, or economic loss.

ATTENTION: This board contains ESD (electostatic

discharge) sensitive parts and assemblies. Static control

precautions are required when installing, testing, servicing,

or repairing this assembly. Component damage may result if

if you do not follow ESD control procedures. If you are not

familiar with static control procedures, refer to Guarding

Against Electrostatic Damage, Allen-Bradley Publication

8000-4.5.2, or any other applicable ESD protection

handbook.

Manual Organization Table 1.A provides a brief overview of topics covered in this manual

and their location within the book.

Chapter

Title Topics

Introduction and

Product Description

Configuration &

Interfaces

Startup &

Installation

Troubleshooting &

Maintenance

Reference

Table 1.A.

Manual Organization

Board Identification, Hardware Con-

tent, Hardware requirements for Inter-

facing.

Configuring the Drive for the CNA

board and interfacing the Drive with a

PLC controller.

Unpacking & Inspection, mounting,

wiring, switch settings and configura-

tion.

Diagnostics and Fault Messages.

Table of all CNA configuration and

setup parameters.