User Manual, Firmware rev. 3.0 or LATER Owner's manual

Publication 1404-UM001F-EN-P - November 2009 131
Setpoint Programming and Operation Chapter 5
Examples of Setpoint Operation
Let us look again at the setpoint applications mentioned at the
beginning of this chapter.
Setpoint Action Type
Setpoint
Action type
Description M4
M5
M6 M8 Setpoint
Action type
Description M4
M5
M
6
M
8
0 None •••22 Clear all energy results •••
1 Energize relay (and alarm flag 1) •••23 Clear setpoint #1 time •••
2 Energize KYZ (and alarm flag 2) •••24 Clear setpoint #2 time •••
3 Set alarm flag 3 •••25 Clear setpoint #3 time •••
4 Set alarm flag 4 •••26 Clear setpoint #4 time •••
5 Set alarm flag 5 •••27 Clear setpoint #5 time •••
6 Set alarm flag 6 •••28 Clear setpoint #6 time •••
7 Set alarm flag 7 •••29 Clear setpoint #7 time •••
8 Set alarm flag 8 •••30 Clear setpoint #8 time •••
9 Set alarm flag 9 •••31 Clear setpoint #9 time •••
10 Set alarm flag 10 •••32 Clear setpoint #10 time •••
11 Set alarm flag 11 •••33 Clear setpoint #11 time ••
12 Set alarm flag 12 •••34 Clear setpoint #12 time ••
13 Set alarm flag 13 •••35 Clear setpoint #13 time ••
14 Set alarm flag 14 •••36 Clear setpoint #14 time ••
15 Set alarm flag 15 •••37 Clear setpoint #15 time ••
16 Set alarm flag 16 •••38 Clear setpoint #16 time ••
17 Save a trend log record •••39 Clear setpoint #17 time ••
18 Clear kWh result •••40 Clear setpoint #18 time ••
19 Clear kVARh result •••41 Clear setpoint #19 time ••
20 Clear kVAh result •••42 Clear setpoint #20 time ••
21 Clear Ah result •••43 Capture oscillograph ••