User Manual, Firmware rev. 3.0 or LATER Owner's manual

Publication 1404-UM001F-EN-P - November 2009 237
Powermonitor 3000 Data Tables Appendix A
Harmonic Analysis Configuration/Read-back Select Parameters
CSP File No. N33
Remote I/O BT 14
CIP Assy. Inst. 39 (Write), 40 (Read)
No. of Elements 9
User Configurable No
Data Type Integer
Data Access Read /Write
PM3000 Type See table
Applies to: Harmonic Results; THD, Crest Factor, and More Parameters on page 238
(All models)
Harmonic Results; Odd Harmonics 1…21 Parameters on page 239
,Harmonic Results;
Odd Harmonics 23…41 Parameters on page 240
, Harmonic Results; Even Harmonics
2…20 Parameters on page 241
, Harmonic Results; Even Harmonics 22…40
Parameters on page 242
(M6 & M8)
Harmonic Results; Odd Harmonics 43…63 Parameters on page 256
, Harmonic Results;
Even Harmonics 42…62 Parameters on page 257
(M8 only)
Harmonic Analysis Configuration/Read-back Select
Element
No.
Modbus
Address
M4
M5
M
6
M
8
Element Name Range Default
Value
Comment
0 41201 •••Password 0…9999 0 Required for configuration, -1 for readback
select, returns -1.
1 41202 •••Channel 1…9 1 Refer to
Configuring Harmonic Analysis on
page 171.
2 41203 •••Read-back mode 0…1 0
3 41204 • Reserved 0 0
••Individual harmonic data type 0…1 0
4 41205 • Reserved 0 0
••Enable/disable Harmonics 0…1 1
5 41206 • Reserved 0 0
••IEEE-519 Max I
sc
Integer 0…9999 0
6 41207 • Reserved 0 0
••IEEE-519 Max I
sc
Exponent -4…21 0
7 41208 • Reserved 0 0
••IEEE 519 Max I
dmnd
Integer 0…9999 0
8 41209 • Reserved 0 0
••IEEE 519 Max I
dmnd
Exponent -4…21 0