User Manual, Firmware rev. 3.0 or LATER Owner's manual

24 Publication 1404-UM001F-EN-P - November 2009
Chapter 2 Product Description
DeviceNet Optional Communication (catalog numbers ending in -DNT)
Status Indicator Indicator Color Indicator State and Communication
Condition
F1 Off Not Used
F2 Off Not Used
Network Status Off Power is off or the power monitor is not
online
Flashing Green Network status is OK, no connections
established
Steady Green Network status is OK, connections
established
Flashing Red Recoverable communication failure; port is
restarting
Steady Red Non-recoverable communication error;
check wiring and configuration parameters
EtherNet/IP Optional Communication (catalog numbers ending in -ENT)
Status Indicator Indicator Color Indicator State and Communication
Condition
LNK Off No valid physical Ethernet connection
Steady Green Valid physical Ethernet connection
ACT Strobing or
Solid Yellow
Power monitor transmitting onto Ethernet
F1 Off Not Used
F2 Off Not Used
NETWORK STATUS Off No power
Flashing Green No established connections
Steady Green Connected; has at least one established
connection
Flashing Red Connection timeout; one or more
connections to this device has timed-out
Steady Red Duplicate IP; the IP address assigned to this
device is already in use
Flashing Green/Red Selftest; this device is performing a
power-up self test
Powermonitor 3000
F1
F2
NETWORK
STATUS
F1
LNK
ACT
F2
NETWORK
STATUS
Powermonitor 3000