User Manual, Firmware rev. 3.0 or LATER Owner's manual

Publication 1404-UM001F-EN-P - November 2009 249
Powermonitor 3000 Data Tables Appendix A
Transient Analysis Configuration/Read-back Select Parameters
CSP File No. F43
Remote I/O BT 44
CIP Assy. Inst. 52 (Write), 53 (Read)
No. of Elements 10
User Configurable No
Data Type Floating Point
Data Access Read / Write
PM3000 Type M8 only
Applies to Transient analysis metering results
Transient Analysis Configuration/Read-back Select
Element
No.
Modbus
Address
Element Name Range Default
Value
Comment
0 - Password 0…9999 0 Required for configuration, -1 for readback select,
returns -1.
1 - DeviceNet unique write
identifier
-32,768…32,767 0 Refer to
DeviceNet Unique Write Identifier on
page 103.
2 - Capture # 0…6 1 Refer to
Transient Analysis Configuration on
page 180.
3 - Cycle # 1…12 1
4 - Read-back mode 0…1 0
5 - Detection mode 0…3 1
6- Reserved 0 0
7 - Auto-threshold set command 0…1 0
8 - Auto-threshold set duration 1…3600 10
9 - Auto-threshold set margin 1.0…100.0 20.0
10 - Voltage trigger threshold 0.1…100.0 10.0
11 - Current trigger threshold 0.1…100.0 10.0
12 - Auto-threshold duration time
left
00