User Manual, Firmware rev. 3.0 or LATER Owner's manual

288 Publication 1404-UM001F-EN-P - November 2009
Appendix C Sample Applications
Ladder Diagram
Message Setup Dialogs
The example uses PLC-5 Typed read and write message types. The
setup dialogs are similar to those found on page 107
and page 108.
ControlNet and ControlLogix
The fourth example reads and writes the power monitor date and time
by using a ControlLogix controller and ControlNet communication.
Tags
The example uses two ControlLogix tags as shown below. The tags
are INT(8) arrays.
0
Read_clock_from_PM3K
EN
DN
ER
Type - PLC5 Typed Read
Message Control Read_Time
...
MSG
Read_Time.DN
Read_Time.ER
U
Read_clock_from_PM3K
1
Set_time_from_CLX
EN
DN
ER
Type - PLC5 Typed Write
Message Control Set_time
...
MSG
Set_time.DN
Set_time.ER
U
Set_time_from_CLX
(End)