User Manual, Firmware rev. 3.0 or LATER Owner's manual

Publication 1404-UM001F-EN-P - November 2009 317
Sample Applications Appendix C
The message configuration for the ReadOld message is shown below.
Start
This rung inserts a brief time delay before enabling the WriteNew message instruction.
msgReadOld.DN
TON
Timer On Delay
Timer Timer1
Preset 100
Accum 0
EN
DN
Timer On Delay
Timer Timer2
Preset 4000
Accum 0
EN
DN
After clearing the flags from the previous write, this rung performs a data table write to transfer the selected user
configured data table setup to the Powermonitor 3000 unit. If the number of paramaters in the User Configurable Data
Table is changed, the Powermonitor 3000 unit resets.
1
2
Timer1.DN
ONS
Oneshot_2 Success
U
Failed
U
MSG
Type - PLC-5 Typed Write
Message Control msgWriteNew
EN
DN
ER
msgWriteNew.DN
Counter1.CU
TON