User Manual, Firmware rev. 3.0 or LATER Owner's manual

Publication 1404-UM001F-EN-P - November 2009 73
Communication Chapter 4
Configure the Powermonitor 3000 Unit by using RSNetworx for DeviceNet
Software
1. Launch RSNetWorx for DeviceNet software.
At this point, the DeviceNet scanner module does not know
what device to scan.
2. Click Online to list the available devices on the network.
TIP
The DeviceNet network is an open-standard, multi-vendor
communication network. Although other vendors offer DeviceNet
configuration tools, all examples in this manual will depict the use of
Rockwell Software RSNetWorx for DeviceNet software.