User Manual

Publication 1408-UM001B-EN-P - May 2008 47
Powermonitor 1000 Data Tables Appendix A
Advanced Configuration Parameters
CSP File No. F11
CIP Instance 4
No. of Elements 22
No. of Words 44
Data Type Float
Data Access Read/Write
Advanced Configuration
Element
No.
Modbus
Address
Range
Element
Name
Default
Value
Range
TR1 TR2 EM1 EM2 EM3
Description
0 40101-2 Password 0 0…9999 •••••When writing the complete table this
parameter allows the input data to be
accepted. When writing a single
parameter the separate password table
should be used. Returns -1 on a read.
1 40103-4 New
Password
0 0…9999 •••••This becomes the new password when the
proper the configuration password entry
has been made and this parameter is
greater than (-1).
2 40105-5 Metering
Result
Averaging
10…1•••••The metering results for volts, amps,
power and frequency is averaged over 8
cycles of data to provide a steady output
reading.
0 = Off
1 = On
3 40107-8 Log Status
Input
Changes
00…1•••••0 = Disable recording of status input
changes into the status log.
1 = Enable recording of status input
changes into the status log.
4 40109-10 Use Daylight
Savings
Correction
00…1•••••0 = Disable Daylight Savings
1 = Enable Daylight Savings