User Manual

Publication 1408-UM001B-EN-P - May 2008 49
Powermonitor 1000 Data Tables Appendix A
11 40123-24 KYZ Pulse
Duration
Setting
250 ms 0 or
50…1000
•••Set as 50…1000 to indicate the duration
of the pulse in milliseconds, or set to 0 for
KYZ-style transition output. (Toggle)
The value for delay is rounded off to the
nearest 10ms internally during this
function.
12 40125-26 Status Input
1 Input Scale
11…
1,000,000
•••When a status pulse is received the count
is increased by the scale factor. Input
pulse * input scale added to total status
count.
13 40127-28 Status Input
2 Input Scale
11…
1,000,000
•••When a status pulse is received the count
is increased by the scale factor. Input
pulse * input scale added to total status
count.
14 40129-30 Demand
Source
00…3 ••When item Demand Broadcast Master
Select of the ethernet table is set to
master a selection of 0 through 2 sets the
type of master input. In this case item 3 is
ignored. When the Demand Broadcast
Master Select of the ethernet table is set
to slave then any of these inputs can set
the end of the demand period. Selections
of 0 through 2 can be selected for RS485
units.
0 = Internal Timer
1 = Status Input 2
2 = Controller Command
3 = Ethernet Demand Broadcast
Selection 3 can only be programmed when
the Ethernet option is installed.
15 40131-32 Demand
Period
Length
15 min 0…99 ••Specifies the desired period for demand
calculations. When set to 0 there are no
projected demand calculations. If the
internal timer is selected a setting of 0
turns the demand function off.
16 40133-34 Number of
Demand
Periods
11…15 ••Specifies the number of demand periods
to average for demand measurement.
Advanced Configuration
Element
No.
Modbus
Address
Range
Element
Name
Default
Value
Range
TR1 TR2 EM1 EM2 EM3
Description