User Manual

DIR 1000587R0002 (L3821)
(22)
DIR1000587R0002(L3821)
(22)
YouwillbepromptedtoinputaPassword
completepasswordentryprocedure(par.3.2.5)
pressthe↵key(enter)
Selectthevalueyouwantfromthelist
Andconrmbypressingthe↵key(enter).
PressESCtwice
BeforeaccessingtheMainMenu,thefollowingboxwillappear:
Acceptthenewconguration
Rejectthenewconguration(thepreviouscongurationisretained)
Changepreviouslyinputvalues.
Toselecttherequiredoptionusethe↓(arrowdown),↑ (arrowup)keys,andpress↵(enter)toconrm.
3.3.3.1 Modication of basic conguration
No parameters can be setwhentheLSIG-MM unitisinalarmconditions.
TheunitmustbeconguredinEDITmode.
Followingtheinstructionsgiveninpar.3.4.3,viewthefollowingonthedisplay:
  Changesystemdate
  ChangeSystemTime
  Selectsystemlanguage
Tochangesystempassword,selecttherelevantmenuitemandpress↵ (enter);thenyouwillbepromptedtoentertheOLDpassword,and
afterwardsyoucaninputthenewonetwice.
PressESCtwicetoreturntotheMainMenu.
BeforeaccessingtheMainMenu,thefollowingboxwillappear:
Acceptthenewconguration
Rejectthenewconguration(thepreviouscongurationisretained)
Changepreviouslyinputvalues.
Note:tosetsystemlanguagecheckthat:
- Therelayissettolocal(ifcommunicationmoduleisinstalled)
- CBisopen
- Auxiliarypowersupplyisprovided(Vaux24VDCorbatteryunit).
Ifoneoftheconditionsmentionedaboveisnotcompliedwith,therelaydoesnotallowchanginglanguage.
1/3
Confirm
Abort
Modify
Confirm
Programming
1/3
Confirm
Abort
Modify
Confirm
Programming
1/4
January12, 2013
Time
Language
Date
System
4/4
****
Language
New Password
Time
System
Password
Enter password
0***
1/4
t=0.14b/(i -1)
0.02
T=13.5b/(i-1)
t=k/i
2
Function
Password
Enter password
0***