Manual

28 Publication ICM-UM001C-EN-E - March 2013
Chapter 3 Configure the Adapter
The Module Properties dialog box opens if you checked Open Module
Properties
6. From the Connection tab, enter the following information.
7. Click OK to close the dialog box.
The 1440-ACNR adapter is added to the I/O Configuration.
TIP
The requested packet interval (RPI) is disabled when the Comm
Format is None.
On this tab In this field Enter
Connection Inhibit Module Check to disable communication between the controller and the
module. Clear to restore communications.
Major Fault on Controller if
Connection Fails While in Run
Mode
Check to have the controller to produce a major fault if the
connection fails in Run mode. Clear if you do not want the
controller to produce a major fault.
Module Fault Displays the fault code returned from the controller and the text
detailing the Module Fault.