Owner manual

Publication GMSI10-UM004B-EN-P - May 2010
92 DeviceNet Objects
Instance Attributes
For instance 1, a Value of 1 means that the startup period is active. For
instance 2, a Value of 1 means that the machine is rotating in the reverse
direction.
Services
The Open and Close services are not valid for Instance 2.
Parameter Object
(Class ID 0F
H
)
The Parameter Object provides the interface to the XM-220 configuration
data.
Parameter Object instance 1 is for the Speed Mode setting (dual channel, single
channel redundant, or reverse rotation). Parameter Object instances 2 to 13
provide an alternate method of setting the configuration parameters with
EPATH data types. And Parameter Object instances 14 and 15 provide an
alternate method of setting the Produced Connection Size and Produced
Connection Path attributes for the Poll Connection because these attributes
can be difficult to get/set directly through the Connection Object.
Table C.20 Discrete Input Object Instance Attributes
Attr ID
Access
Rule Name Data Type Description Semantics
3 Get Value BOOL Value 0 = Off
1 = On
199 Set Backdoor
Service
USINT Setting this attribute is
equivalent to requesting
the specified service.
Set to one of the
following values to
perform the
specified service:
0x32 = Open
0x33 = Close
Table C.21 Discrete Input Object Services
Service
Code Class/Instance Usage Name Description
0E
h
Class/Instance Get_Attribute_Single Returns the contents of the
specified attribute.
10
h
Instance Set_Attribute_Single Sets the contents of the
specified attribute.
32
h
Instance Open Opens the virtual Startup
switch.
33
h
Instance Close Closes the virtual Startup
switch.