Owner manual

45 Publication GMSI10-UM004B-EN-P - May 2010
Chapter 3
Configuration Parameters
This chapter provides a complete listing and description of the XM-220
parameters. The parameters can be viewed and edited using the XM Serial
Configuration Utility software and a personal computer. If the module is
installed on a DeviceNet network, configuring can also be performed using a
network configuration tool such as RSNetWorx (Version 3.0 or later). Refer to
your configuration tool documentation for instructions on configuring a
device.
For information about See page
Measurement Mode Parameter 46
Channel Tachometer Parameters 47
Alarm Parameters 50
Relay Parameters 53
4-20mA Output Parameters 58
I/O Data Parameters 59
Data Parameters 60
Device Mode Parameters 63
IMPORTANT
The appearance and procedure to configure the parameters
may differ in different software.