Owner manual

Publication GMSI10-UM004B-EN-P - May 2010

82 DeviceNet Objects

Identity Object

(Class ID 01

)

The Identity Object provides identification and general information about the

device.

Class Attributes

The Identity Object provides no class attributes.

Instance Attributes

Status

The Status is a 16 bit value. The following bits are implemented.

Table C.1 Identity Object Instance Attributes

Attr ID

Access

Rule Name Data Type Default Value

1 Get Vendor ID UINT 668 = Entek

2 Get Device Type UINT 109 (Specialty I/O)

3 Get Product Code UINT 35 (0x23)

4 Get Revision:

Major

Minor

STRUCT OF

USINT

Value varies with each firmware revision

5 Get Status WORD

6 Get Serial Number UDINT

7 Get Product Name SHORT_

STRING

" XM-220 Speed Module"

Table C.2 Identity Object Status

Bit Name Description

0 Owned TRUE indicates that the module has an owner. More

specifically, the Predefined Master/Slave Connection Set

has been allocated to a master.

1 Reserved, set to 0

2 Configured This bit is set whenever a saved configuration is

successfully loaded from non-volatile memory. This bit is

cleared whenever the default configuration is restored or

loaded.

3 Reserved, set to 0