Manual

Publication GMSI10-UM008D-EN-P - August 2010

Alarm and Relay Status Parameters

Parameter Name Description Values/Comments

Alarm Status States the current status of the measurement value

and rate of change alarm.

Possible status values:

• Normal - The alarm is enabled, the

device is in Run mode, there is no

sensor-out-of-range error, and the

current measurement is not within

the Alert or Danger Threshold

value(s).

• Alert - The alarm is enabled, the

device is in Run mode, there is no

sensor-out-of-range error, and the

current measurement is in excess of

the Alert Threshold value(s) but

not in excess of the Danger

Threshold value(s).

• Danger - The alarm is enabled, the

device is in Run mode, there is no

sensor-out-of-range error, and the

current measurement is in excess of

the Danger Threshold value(s).

• Disarm-The alarm is disabled or the

device is in Program mode.

• Sensor OOR - The alarm is

enabled, the device is in Run mode,

and a sensor-out-of-range error is

detected for the associated sensor.

• Module Fault - Hardware or

firmware failure, or an error has

been detected and is preventing

proper operation of the device.

Relay Status States the current status of the relay. Possible status values: Activated

Not Activated