User Manual

Publication 0160-5.18 - June 2003
6-6 Using 160-DN2 with DeviceNet Scanner
Selecting Input and Output
Assemblies for I/O Messaging
(Continued)
An example screen (Figure 6.4) shows Output Assembly 103 and
Input Assembly 104 selected. The following steps were used:
Changing the Output Assembly
1. In the Current Value column, double-click on the value for
Parameter 107 - [Output Assembly].
2. Enter Assembly Number “103.”
3. Click Apply to save the changes.
Changing the Input Assembly
1. In the Current Value column, double-click on the value for
Parameter 108 - [Input Assembly].
2. Enter Assembly Number “104.”
3. Click Apply to save the changes.
Figure 6.4
Example Input and Output Assemblies Screen