Reference Manual User Manual

All parameters are specified at an input voltage of 24V, 10A output load, 25°C ambient and after a 5 minutes run-in time unless noted otherwise.
It is assumed that the input power source can deliver a sufficient output current.
2 Rockwell Automation Publication 1606-RM013A-EN-P — March 2014
Bulletin 1606 Switched Mode Power Supplies
DC-UPS Control Unit
Requires Only One 12V Battery for a 24V Output
Allows Batteries Between 17Ah and 130Ah
Battery Charging with Temperature Tracking
Stable Output Voltage in Buer Mode
Superior Battery Management for Longest Battery Life
Comprehensive Diagnostic and Monitoring Functions
Replace Battery Signal Included
Electronically Overload and Short Circuit Protected
50% Power Reserves
3 Year Warranty
1. Description
2. Specication Quick Reference
Input voltage nom. 24Vdc
range 22.5-30Vdc
Output current min.15A Normal mode
min. 10A Buer mode
Output voltage typ. 0.23V lower
as input voltage
Normal mode
22.25V Buer mode, 10A
Allowed batteries 17Ah to 130Ah VRLA lead acid
Temperature range -25 to +50°C
Dimensions 49x124x117mm WxHxD
Buer time (at 10A) typ. 55 minutes 26Ah battery
typ. 4 hours 100Ah battery
This uninterruptible power supply (UPS) controller
1606-XLS240-UPSE is an addition to standard 24V
power supplies to bridge power failures or
emergency systems which must be kept fully in
operation for e.g. 72 hours.
The DC-UPS includes an internal temperature sensor
and a professional battery management system
which charges and monitors the battery to achieve
the longest battery service life as well as many
diagnostic functions that ensure a reliable operation
of the entire system.
A unique feature of the 1606-XLS240-UPSE is that only
one 12V battery is required to buer the 24V
output. This makes matching batteries unnecessary
and allows a precise battery charging and testing.
1606-XLS240-UPS
1606-XLS240-UPSD
1606-XLS240-UPSC
1606-XLS240-UPSE
battery
included
1606-XLS240-UPS Series
Related products
larger
battery sizes
additional
12V output
Typical setup of a DC-UPS system:
24V
Power
Supply
12V
Battery
24V
DC-UPS
24V
Load
AC
e.g.:
DC
e.g.: PLC
3. Catalog Numbers
4. Certication Marks
DC UPS
1606-XLS240-UPSE Controller
Accessories 1606-XLSBAT2 Battery module 12V 26Ah
1606-XLSBATBR23 Mounting kit w/o battery
IND. CONT. E
Q
.
UL 508
UL 60950-1
EMC, LVD
1606-XLB Panel/Wall mount bracket
UL 508
Marine
Marine RINA
GOST R
C-Tick