Installation Instructions User guide

POINT I/O 24V dc Digital Diagnostics Input Module 11
Publication
1734-IN029A-EN-E - January 2007
Install the Module
Install the module before or after base installation. Before installing
the module into the mounting base be sure of this.
• The mounting base is correctly keyed.
• The mounting base locking screw is positioned horizontally
referenced to the base.
Be sure the DIN-rail locking screw is
in the horizontal position.
Turn the keyswitch to align
the number with the notch.
Notch position 3 is shown.
1734-TB base is shown.
44229