Installation Instructions User Manual

POINT I/O 8 Channel High Density Current Input Modules 19
Publication
1734-IN033B-EN-P - November 2010
General Specifications
Attribute Value
Module location 1734-TB/TBS/RTB/RTBS wiring base assembly
POINTBus current 75 mA
Power dissipation, max 0.6 W @ 28.8V DC
Thermal dissipation, max 2.0 BTU/hr @ 28.8V DC
Supply voltage, backplane 5V DC
Supply voltage range, field
power input
10…28.8V DC, 30 mA, Class 2
Input current 4…20 mA or 0…20 mA
Isolation voltage 50V (continuous), basic insulation type, inputs and field power
to system
Type tested at 1500V AC for 60 s
No isolation between individual inputs or inputs to field power
Dimensions (HxWxD),
approx.
56 x 12 x 75.5 mm
(2.21 x 0.47 x 2.97 in.)
Keyswitch position 3
Enclosure type rating None (open-style)
Wire size Determined by installed terminal block
Wiring category
(1)
2 – on signal ports
1 – on power ports
Wire type Shielded
Terminal base screw
torque
Determined by installed terminal block
Weight, approx. 35 g (1.235 oz)
North American temp code T4A
IEC temp code T4
(1)
Use this conductor category information for planning conductor routing as described in Industrial
Automation Wiring and Grounding Guidelines, publication 1770-4.1
.