User Manual Manual

Rockwell Automation Publication 1734-UM014B-EN-P - June 2013 9

Chapter

Install Your Adapter

Overview

This chapter describes how to physically install the Series A POINT I/O and

ArmorPOINT I/O 2 Port EtherNet/IP adapters; and how to connect the

adapter to the EtherNet/IP network. The only tools you require are a flat or

Phillips head screwdriver and a drill.

This table lists where to find specific information.

Topic Page

Identify Adapter Components 10

Mount the I/O Adapter 11

Mount the POINT I/O Adapter on a DIN Rail 11

Mount the ArmorPOINT I/O Adapter and Base on a Wall or Panel 12

Install the POINT I/O Adapter Module 13

Install the ArmorPOINT I/O Adapter Module 13

Wire the POINT I/O Adapter 14

Wire the ArmorPOINT I/O Adapter 15

ATTENTION: You must use series C POINT I/O modules with the

adapter. Series A or B POINT I/O modules do not work with the adapter.