Manualshelf

User Manual Manual

ManualsBrandsRockwell Automation ManualsEquipment1738-AENTR, Series A 1734 POINT I/O and 1738 ArmorPOINT I/O 2 Port Ethernet/IP Adapter
41424344454647484950
Rockwell Automation Publication 1734-UM014B-EN-P - June 2013 39
Configure the Adapter for Direct Connection in RSLogix 5000 Software Chapter 4
3. Click OK.
The New Module dialog opens.
Enter values for Name and Slot, noting we used the following.
4. On the Connection tab, enter 10 ms as the RPI for the 1734-OV4E
module.
5. Click OK.
The I/O Configuration in the Project dialog should look similar to the
following
Name POINT_Digital_Output
Slot 2