User Manual Manual

84 Rockwell Automation Publication 1734-UM014B-EN-P - June 2013
Chapter B Adapter Web Dialogs
• Connection Number
• Uptime
• Receive and Transmit (Rcv/Xmt)
• Connection ID
• Source IP Address with an indication of the following:
– (O) for originator
– (T) for target
• Destination IP Address
• Multicast Address
• Requested Packet Interval (RPI)
• Lost/Slot that shows the number of lost packets and the slot number for
the connection, with a slot value of 0 indicating that this is a rack-
optimized connection
• Size of data in bytes
Use the Diagnostic Messaging Page
To use the Diagnostic Messaging page to execute explicit, unconnected message
services, use this procedure.
1. Click Diagnostic Messaging from the tab at the top of the page or panel on
the left.
The Diagnostic Messaging page opens.
2. From the Diagnostic Messaging page, enter the following:
• Service – choose either Get Attribute Single or Get Attributes All
• I/O Module Slot Position (0 to 63 decimal)
• Class (decimal)
• Instance (decimal)