Owner manual
Table Of Contents
- 1747-6.1, Data Table Access Module User Manual
- Important User Information
- Summary of Changes
- Table of Contents
- Preface
- 1 - Data Table Access Module Overview
- 2 - Installation and Power Up
- 3 - Module Setup Procedure
- 4 - Attaching to a Processor
- 5 - Monitoring and Modifying Data
- 6 - Quick Recall Functions
- 7 - Processor Control Functions
- 8 - Message Capability
- 9 - Troubleshooting
- A - Specifications
- B - SLC 500 Data Files and Logical Addressing
- C - Module Display Character Set
- D - Mounting Template
- Index
- Back Cover
Processor Control Functions 7-5
Publication 1747-6.1
Transferring Memory
from RAM to EEPROM
To transfer a program from processor RAM to EEPROM memory,
from any display:
1. Configure the module for the Modify mode.
2. Make sure the processor is in the Program mode.
3. To initiate the memory transfer:
Press
4. The module displays:
5. To confirm:
Press
If the key is pressed at the Confirm screen, the display
returns to the previous Ready Attached screen, and the memory
transfer is aborted.
6. When the transfer is initiated, the module displays:
7. If the memory transfer is successful, the module displays:
8. When the transfer is complete, the module returns to the Ready
Attached screen.
If an error occurs during the transfer, an error message displays on the
bottom line of the display. Refer to chapter 9, Troubleshooting.
Confirm?
CPU RAM -> PROM,
Working....
CPU RAM -> PROM,
Transfer Success
CPU RAM -> PROM,