Owner manual

ManualsBrandsRockwell Automation ManualsEquipment1747-DTAM-E,D17476.1 Data Table Access Module (DTAM)

Table Of Contents

1747-6.1, Data Table Access Module User Manual
Important User Information
Summary of Changes
- New Information
Table of Contents
Preface
- Who Should Use this Manual
- Purpose of this Manual
  - Contents of this Manual
  - Related Documentation
- Common Techniques Used in this Manual
- Allen-Bradley Support
1 - Data Table Access Module Overview
- Module Overview
2 - Installation and Power Up
- European Union Directive Compliance
  - EMC Directive
- Mounting the Module
- Connecting Your Equipment
- Module Configuration and Adjustments
- Power-Up Sequence
3 - Module Setup Procedure
- Keyboard Description
- Factory Default Settings
- Entering the Setup Mode
- Selecting the Language
- Selecting the Node Address
- Setting the Baud Rate
- Setting the Auto Attach Function
- Backlighting the LCD
- Setting the Monitor Override Function
- Accepting Module Setup Parameters
- Using the Module Reset
4 - Attaching to a Processor
- Manual Attach Procedure
- Auto Attach Procedure
- Ready Attached Screen
- Backspace Function During Attach Procedure
- Attaching to a Password Protected Processor
5 - Monitoring and Modifying Data
- Operating Modes
- Logical Data File Addressing
- Backspace Function During Data File Address Entry
- Quick Access Addressing
- Entering Data File Addresses
- How to Change Displayed Data File Addresses
- How to Change Data File Values
6 - Quick Recall Functions
- Quick Recall Function Overview
- Defining Quick Recall Functions
- Using Quick Recall Functions
- Clearing Quick Recall Functions
7 - Processor Control Functions
- Changing the Processor to Run Mode
- Changing the Processor to Program Mode
- Viewing Processor Faults
- Clearing Processor Faults
- Transferring Memory from EEPROM to RAM
- Transferring Memory from RAM to EEPROM
8 - Message Capability
- Message Overview
- Programming the MSG Instruction
- 5/02 Control Block Configuration
- 5/03 Control Block Configuration
- 8-Word Message
- 16-Word Message
- 12-Word Message
- 13-Word Message
- 18-Word Message
- 1-Word Message
- Application Example 1
- Application Example 2
9 - Troubleshooting
- Troubleshooting Module Problems Using the Communications LED
- Troubleshooting Module Problems Using the LCD
- Troubleshooting Communication Problems Using the LCD
- Troubleshooting Function Problems Using the LCD
- Troubleshooting MSG Instruction Error Codes
- Troubleshooting Processor Faults Using the LCD
A - Specifications
- Operating Power
- Temperature and Humidity
- General Characteristics
B - SLC 500 Data Files and Logical Addressing
- Data Files
C - Module Display Character Set
- Display Character Table
D - Mounting Template
- Using the Template
Index
Back Cover

Message Capability 8-17

Publication 1747-6.1

4. The value is written to the data entry destination address, and the

module display returns to the screen displayed before the first

message was received.

If you press the key before the key while

either of these messages is displayed, the value in the data entry

destination address remains unchanged, and the module dis-

plays:

5. Press any key to clear this message. The display returns to the

previous screen.

NO VALUE ENTERED