User guide

Chapter 6
Creating a Program
6–2
2. Press [F3], PROGMAINT. Then press [ENTER] to view the additional
menu functions (as indicated by the > symbol in the lower right corner).
The following display appears:
File Name: Prog Name:2345
File Name Type Size(Instr)
0 System *
1 Reserved *
2 Ladder *
F1 F2 F3 F4 F5
EDT_DAT SEL_PRO EDT_I/O
OFL
CLR_MEM >
3. Press [F4], CLR_MEM. The following display appears:
File Name: Prog Name:2345
File Name Type Size(Instr)
0 System 76
1 Reserved 0
2 Ladder 5
ARE YOU SURE?
F1 F2 F3 F4 F5
YES
OFL
NO
4. Press [F2], YES. This clears the HHT memory and the following display
appears:
File Name: Prog Name:DEFAULT
File Name Type Size(Instr)
0 System *
1 Reserved *
2 Ladder *
F1 F2 F3 F4 F5
EDT_DAT SEL_PRO EDT_I/O
OFL
CLR_MEM >
Configuring the Controller
After clearing the HHT memory, you must configure the processor and I/O
structure for your application.
Configuring the Processor
1. Press
[F2], SEL_PRO. Then press [F1], TYPE. The following display
appears:
Type = 1747–L511 CPU–1K USER MEMORY
Series =
Memory Size = 1 K INSTRUCTIONS
F1 F2 F3 F4 F5
Type = 1747–L511 CPU–1K USER MEMORY
OTHER