User guide

Chapter 8
Compiling and Saving a Program
8–2
2. To save this program and continue editing, press [F4], SAVE_CT. To
save this program and exit offline editing, press
[F5], SAVE_EX.
If you are using a SLC 5/02 processor, the following display appears:
Compiler Options
F1 F2 F3 F4 F5
TSTRUNGFUTACC ACCEPT
OFL
Future Access: Yes
MODIFY OPTIONS, ACCEPT TO COMPILE
Test Single Rung: Disable
Index Across Files: Disallow
File Protection: Outputs
MODIFY OPTIONS, ACCEPT TO COMPILE OFL
INDXCHK FILEPRT
Important: The above display appears if you have a SLC 5/02. If you have
a fixed controller or a SLC 5/01 processor only
[F1]and [F5]
appear.
Function Key Description
[F1], Future Access – Fixed, SLC 5/01, and SLC
5/02 processors
Toggles between Yes and No. This option allows
you to protect proprietary program data and
algorithms. The protection takes affect only after
the processor file is downloaded to a controller.
[F2], Test Single Rung – SLC 5/02 processor Toggles between Enable and Disable. This
option allows you to execute your program one
rung at a time or a section at a time. Use this
function for debugging purposes.
[F3], Index Checks – SLC 5/02 processor Toggles between Allow and Disallow. This
option allows you to use indexed addressing to
address data table elements outside of the base
address data file.
[F4], File Protect – SLC 5/02 processor Toggles between Outputs, None, and All. This
option allows you to protect your data table files
from external modification by devices on the
DH–485 network.
[F5], ACCEPT Starts the compile.
3. After you have made your selections press [F5], ACCEPT.