User Manual

118 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 7 Configure Your Controller for DeviceNet Communication
The following dialog box appears when the BOOL data type is selected.
The values shown above represent bit 0 of the first byte.
8. From the appropriate pull-down menu, choose the Start Byte, Array
Count, and Start Bit.
9. Enter the Name.
10. Enter the initial value of 0.
11. Click OK.
The following dialog box appears.
To add a second BOOL that represents bit 1 of the first byte, follow this
procedure.