User Manual

122 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 7 Configure Your Controller for DeviceNet Communication
The following edits occur in the RN10C DeviceNet scanner configuration in
RSNetWorx software.
Figure 25 - RN10C DeviceNet Scanner Configuration Changes
Maximum Connection Sizes
This example has a polled connection with 16 bytes input and 16 bytes output. A
second connection (cyclic) of 16 bytes input was added. The following show the
changes required to support the configuration.
The SmartGuard slave I/O configuration appears as shown.