User Manual

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 125
Chapter 8
Configure Your Controller for EtherNet/IP
Communication
Introduction
The SmartGuard controller (catalog number 1752-L24BBBE) offers EtherNet/
IP connectivity.
Multicast Connections
You can make only two connections to the SmartGuard controller at any one
time. It can be one input and one output, or two inputs or two outputs. Even
though the connections are multicast, once the two connections are made, no
other connections are accepted.
For example, you can have two controllers connected to one input connection on
the SmartGuard controller multicast input assembly, and this would consume the
two EtherNet/IP connections.
Topic Page
Configure Target I/O in RSNetWorx for DeviceNet Software 126
Set Up Your Controller as a Slave by Using RSLogix 5000 Software Generic Profile 130
Configure Communication between a Standard PanelView Terminal and a
SmartGuard 600 Controller over an EtherNet/IP Network
132