User Manual

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 129
Configure Your Controller for EtherNet/IP Communication Chapter 8
10. Click OK.
The following dialog box appears.
11. Create a tag name for each bit in an I/O assembly.
a. Under I/O Tag, select the applicable assembly and click Edit
Comment.
b. Enter a comment for each bit in the tag.
The tag name comments entered here are displayed in the Logic Editor.
c. Click OK.
12. Click OK to return to the EtherNet/IP Target I/O tab.
You can create additional input or output assemblies needed for your
application by repeating steps 2...11.
13. To save your configuration, from the file menu, choose save.