User Manual

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 175
Monitor Status and Handle Faults Chapter 12
2. Click Clear on the Maintenance Monitor dialog box.
Viewing I/O Status Data
When the controller operates as a safety slave or a standard slave target, status
information can be added to the first line of the transmit data. The information
can be stored in a controller and used to establish a monitoring system.
Table 13 - Controller Status Data
Tag Name Data Size Attribute Type
General Status 1 Byte Non-safety
Local Input Status Word Safety
Local Output Status Byte Safety
Test Output/Muting Lamp Status Byte Non-safety
ATTENTION: Do not use data with a non-safety attribute to configure the safety
control system. The necessary measures for safety data are not taken during the
generation of non-safety data.