User Manual

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 203
Appendix C
Logic Functions Command Reference
Introduction
This appendix describes the logic functions used for programming.
NOT Instruction
The outcome is the inverse of the input.
NOT Instruction Diagram
NOT Instruction Truth Table
In the truth table, 0 is off and 1 is on.
Topic Page
NOT Instruction 203
AND Instruction 204
OR Instruction 206
Exclusive OR Instruction 209
Exclusive NOR Instruction 210
Routing Instruction 211
Reset Set Flip-flop (RS-FF) Instruction 211
Multi-connector Instruction 212
Comparator Instruction 213
Input 1 Output 1
01
10
Output 1Input 1