User Manual

64 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 5 Manage the Safety Network Number
Follow these steps if you need to set the SNN for a particular device.
1. Click the target device in the hardware graphic view and choose Set Safety
Network Number from the Device menu.
2. Choose Time-based and click Generate, or choose Manual and fill in a
decimal number from 1…9999.
3. Click OK.
4. Verify that the Network status indicator is rapidly alternating between red
and green on the correct device and click OK.
TIP
You can use the copy and paste buttons on the Set Safety Network
Number dialog box to copy and paste an SNN between devices and to
make a record of the SNN.