Manual

Publication 1756-UM522B-EN-P - February 2003
B-134 1756-DMD30 Specific Information
2012 DM Sync Count
Displays the value of an internal counter that synchronizes the
Drive Module and PMI processor.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
DPS/PMI
2013 PMI Gain Count
Displays the number of gain messages sent on Drive
Communication. This is a 16-bit value that rolls over when it
reaches its maximum.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
DPS/PMI
2014 DM Tx Time
Displays the value of parameter 2012 [DM Sync Count] when
the Drive Module finished transmitting a set point message.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
DPS/PMI
2015 DM Tx Time Avail
Displays the value of theparameter 2012 [DM Sync Count]
when the Drive Module receives a feedback message. This is
a good indication of the amount of remaining bandwith on
Drive Communication.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
DPS/PMI
2040 Rail Port 0 Ch 0
Enter the code for the type of Rail I/O on each channel. Refer
to section 3.1, “Rail I/O Port Registers”, of Reliance Electric
publication 3006, Distributed Power System SD3000 Drive
Configuration and Programming.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Linkable, Read-Write, 16-bit Integer
DPS/PMI
DPS/PMI
2041 Rail Port 0 Ch 1
Enter the code for the type of Rail I/O on each channel. Refer
to section 3.1, “Rail I/O Port Registers”, of Reliance Electric
publication 3006, Distributed Power System SD3000 Drive
Configuration and Programming.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Linkable, Read-Write, 16-bit Integer
DPS/PMI
DPS/PMI
2042 Rail Port 0 Ch 2
Enter the code for the type of Rail I/O on each channel. Refer
to section 3.1, “Rail I/O Port Registers”, of Reliance Electric
publication 3006, Distributed Power System SD3000 Drive
Configuration and Programming.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Linkable, Read-Write, 16-bit Integer
DPS/PMI
DPS/PMI
2043 Rail Port 0 Ch 3
Enter the code for the type of Rail I/O on each channel. Refer
to section 3.1, “Rail I/O Port Registers”, of Reliance Electric
publication 3006, Distributed Power System SD3000 Drive
Configuration and Programming.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Linkable, Read-Write, 16-bit Integer
DPS/PMI
DPS/PMI
No. Name
Description
Values