Manual

Publication 1756-UM522B-EN-P - February 2003
C-46 1756-DMF30 Specific Information
1002 SL System Rev
Indicates the system revision of the SynchLink network. To be
compatible on the network, all nodes must have the same
major revision.
Default:
Min:
Max:
Type:
File:
Group:
0.001
0.001
999.999
Non-Linkable, Read-Only, 32-Bit Integer
Monitor
Drive Data
1010 SL Rx Comm Frmt
Defines the node's communication format for receiving
SynchLink data. This determines the number of axis data,
direct data and buffered data words received. Configure the
format by using the Peer Communication window in
DriveExecutive programming software.
Value Axis Direct Buffered
Options: Val 0 0 0 0
File:
Group:
SynchLink
SynchLink Config
1011 SL Rx DirectSel0
Determines the destination for the data received at word 0 of
direct received data. Configure the selection by using the Peer
Communication window.
Default: Val 0 No Data
Options: Val 0
Val 1
Val 2
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Val 9
Val 10
No Data
SL Multiply
Event P0
Event P1
Event D0
Event D1
Event D2
Event D3
Event Opt0
Event Opt1
Event Status
File:
Group:
SynchLink
SynchLink Config
1012 SL Rx DirectSel1
Determines the destination for the data received at word 1 of
direct received data. Configure the selection by using the Peer
Communication window.
Default: Val 0 No Data
Options: Val 0
Val 1
Val 2
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Val 9
Val 10
No Data
SL Multiply
Event P0
Event P1
Event D0
Event D1
Event D2
Event D3
Event Opt0
Event Opt1
Event Status
File:
Group:
SynchLink
SynchLink Config
No. Name
Description
Values