Configuration Manual Owner manual

Publication 1757-PM002A-EN-E - June 2006
4-12 Applications
5. Click OK.
Note that the red x next to each device in the HSE window has
disappeared once the association has been made. This indicates that
communication with the linking device is established
Check the Live List
This step involves verifying that you are connected to the proper devices.
1. To view the Live List for the HSE, right-click the desired HSE and
select Live List.
The HSE Live List opens, showing all the bridges connected to your PC.
Devices that are ghosted in the HSE Live List have not yet established a
connection to RSFieldbus through the HSE Server.
2. Right-click H1-1 network and select Live List.
The H1-1 Live List opens, showing all of the devices connected through
your linking device. Devices that are ghosted in the H1-1 Live List have
not yet established a connection to RSFieldbus through the HSE Server
and linking device. Prior to continuation, the device must not be in a
ghosted state in the live list.
Associate Devices
1. Once all the devices have become solid on the H1-1 live list, select the
H1-1 Fieldbus window.
2. In the HSE window, right-click the FI302 and select Attributes.
3. In the Device Attributes window, select your FI302 from the Device Id
drop-down list and click OK.