Configuration Manual Owner manual

Publication 1757-PM002A-EN-E - June 2006
Applications 4-15
3. Select Resource Block for the Block Type.
4. Enter >FFLD Resource< for the Block Tag.
5. Click OK.
The Block is added to the project.
6. Right-click the Resource Block and select Off Line Characterization.
The Off Line window opens.
To view all of the parameters, click and maximize the
Characterization window.
7. Expand the MODE_BLK parameter.
8. Select TARGET, then click in the Value column and select Auto.
9. Click End Edit (or press <Enter>) to complete the edit.
Auto is shown next to TARGET.
10. Click Close.
The MODE_BLK parameter icon is shown under the Resource Block
icon.