Installation and Upgrade Guide User guide

Publication 1757-IN032B-EN-P - April 2001
System Software Upgrade Procedures 1-85
c. Key in >2< as the Station Number for Static or key in
appropriate update rates and display number for Rotary.
7. Click OK to close the TCP/IP dialog box.
8. Click Save to open the Save Setup dialog box.
9. Key in >default.stn< in the File name field and click Save.
10. Click Yes to replace the existing file.
11. Click Cancel at the Unable to connect prompt, if applicable.
12. Click Station
⇒Exit.
13. Click OK to exit Station.