Installation and Upgrade Guide User guide

Publication 1757-IN032B-EN-P - April 2001
3-32 Full PC Software Installation Procedures
6. In the graphic pane, select the Supervisory Uplink CNB and click
Change ControlNet Parameters .
7. Change UMax to 24 and click OK.
8. Click Yes to confirm the action.
9. Click OK.
10. Close NTOOLS.
Updating the 1784-PCIC Network Address
1. Click Start⇒Programs⇒Rockwell Software⇒RSLinx⇒RSLinx
to call up the Rockwell Software RSLinx window.
2. Click Communications
⇒Configure Drivers to call up the
Configure Drivers dialog box.
3. Select AB_PCIC-1 in the Configured Drivers list box and click
Configure.
4. In the Configure 1784-PCIC window, enter 24 for the new
Network Address for the PCIC and click OK.
5. Restart the PC.
ATTENTION
!
Before continuing, you MUST exit all ProcessLogix
applications and stop all ProcessLogix services.
Refer to Stopping ProcessLogix Applications and
Services on page 1-8.