Installation and Upgrade Guide User guide

Publication 1757-IN032B-EN-P - April 2001
Additional Redundant Server Procedures 4-21
Refer to Synchronizing Server Databases on Redundant Servers on
page 1-71.
Synchronizing Other Files
Refer to Synchronizing Other Files on page 1-72.
Checking Control Builder Operation and Logging On
Use the following general procedure to log on and check Control Builder
operation on a ProcessLogix Engineering Workstation.
1. Click Start
⇒Programs⇒ProcessLogix Engineering
Tools
⇒Control Builder.
2. In the Login dialog box, make these entries:
a. Key in >mngr< as the default User Name.
b. Key in >mngr1< as the default Password.
c. Key in the name of the appropriate Server node in the Server
Name field.
3. Click OK.
Enabling the ProcessLogix OPC Server
Refer to Enabling the ProcessLogix OPC Server on page 1-72.
Backing Up a ProcessLogix Server to Tape
Refer to Backing Up a ProcessLogix Server to Tape on page 1-6.
Creating an Emergency Repair Disk
Refer to Creating an Emergency Repair Disk on page 1-43.