Installation and Upgrade Guide User guide

Publication 1757-IN032B-EN-P - April 2001
1-58 System Software Upgrade Procedures
9. Click Yes to confirm the action.
10. Click OK.
11. Close NTOOLS.
Updating the 1784-PCIC Network Address
1. On SERVERB, click Start⇒Programs⇒Rockwell
Software
⇒RSLinx⇒RSLinx to call up the Rockwell Software
RSLinx window.
2. Click Communications
⇒Configure Drivers to call up the
Configure Drivers dialog box.
3. Select AB_PCIC-1 in the Configured Drivers list box and click
Configure.
4. In the Configure 1784-PCIC window, enter 23 for the new
Network Address for the 1784-PCIC and click OK.
5. Restart SERVERB.
6. On SERVERA, click Start
⇒Programs⇒Rockwell
Software
⇒RSLinx⇒RSLinx to call up the Rockwell Software
RSLinx window.
7. Click Communications
⇒Configure Drivers to call up the
Configure Drivers dialog box.
ATTENTION
!
Before continuing, you MUST exit all ProcessLogix
applications and stop all ProcessLogix services on the
SERVERB node.
Refer to Stopping ProcessLogix Applications and
Services on page 1-8.
ATTENTION
!
Before continuing, you MUST exit all ProcessLogix
applications and stop all ProcessLogix services on the
SERVERA node.
Refer to Stopping ProcessLogix Applications and
Services on page 1-8.